Alarms Menu Options And Parameters - Radyne DMD2050 Operation Manual

DMD2050 Universal Satellite Modem
PORT 1 STATUS
PORT 2 STATUS
PORT 3 STATUS
PORT 4 STATUS
WAN STATUS
VOLTAGES (menu)
TEMPERATURE
+1.5V RX SUPPLY
+1.5V TX SUPPLY
+3.3V SUPPLY
+5V SUPPLY
+12V SUPPLY
+20V SUPPLY
-12V SUPPLY
RX BUFFER LEVEL
RX BUFFER RESET (ENTER)

4.3.7 Alarms Menu Options and Parameters

TM110 – Rev. 1.3
{See the note above}
Displays the current status of LAN Port 1.
{See the note above}
Displays the current status of LAN Port 2.
{See the note above}
Displays the current status of LAN Port 3.
{See the note above}
Displays the current status of LAN Port 4.
{See the note above}
Displays the current status of the WAN Port.
Displays internal temperature.
Displays the measured voltage of the 1.5 Volt Rx power
bus located inside the modem.
Displays the measured voltage of the 1.5 Volt Tx power
bus located inside the modem.
Displays the measured voltage of the +3.3 Volt power
bus located inside the modem.
Displays the measured voltage of the +5 Volt power bus
located inside the modem.
Displays the measured voltage of the +12 Volt power
bus located inside the modem.
Displays the measured voltage of the +20 Volt power
bus located inside the modem.
Displays the measured voltage of the -12 Volt power bus
located inside the modem.
{0 – 100%}
Displays the status of the Doppler Buffer.
Allows the user to re-center the Doppler Buffer when
<ENTER> is pressed on the keypad.
User Interfaces
4-21