Table of Contents
Advertisement
MM200 High-Speed Microwave Modem
2.
In the New Password Text Box, enter the new password (case sensitive, only *'s appear
for security).
3.
Re-enter the new password to verify the desired setting.
4.
Select OK
4.22 Logging Off
1.
To log off the SNMP Configuration, press '14' followed by <Enter>. The following
confirmation message will be displayed to avoid inadvertent exits:
You will be logged off. Are you sure? (Y/N):
4.23 Changing Your Authentication Password
1.
To change your authentication password, you must be logged on in order for the
"SNMP/Security" selection to appear. Once logged on, proceed to the "SECURITY
CONTROLS" Menu Selections by pressing '12', then '13', followed by <Enter> to open the
Change Password Dialog.
+----------| Change Password |----------+
|
|
1.Old Password
|
2.New Password
|
3.Re-enter New Password :
|
|
4.OK
|
+-----------------------------------------------+
2.
In the Old Password Text Box, enter "Oper" (case sensitive).
3.
In the New Password Text Box, enter the new password (case sensitive, only *'s appear
for security).
4.
Re-enter the new password to verify desired setting.
5.
Select OK
4.24 Changing Your Privacy Password
To change your privacy password, you must be logged on as either Oper-md5 or Oper-sha
(Operator). Once logged on, proceed to the "SECURITY CONTROLS" menu selections by
pressing 12. Press 14 followed by <Enter> to open the Change Password dialog.
+----------| Change Password |----------+
|
|
1.Old Password
|
2.New Password
|
3.Re-enter New Password :
|
|
4.OK
|
+-----------------------------------------------+
1.
In the Old Password Text Box, enter "Oper" (case sensitive).
2.
In the New Password Text Box, enter the new password (case sensitive, only *'s appear
for security).
TM086 - Rev. 4.1
|
:
|
:
|
|
|
5.CANCEL
|
|
|
:
|
:
|
|
|
5.CANCEL
|
|
User Interfaces
4-45
Advertisement
Table of Contents
Troubleshooting
