Ping Program - Radyne MM200 Installation And Operation Manual

User Interfaces

4.42 Ping Program

1. PING is an application that uses the ICMP protocol to report if a host is responding. To
check whether the MM200 modem is reachable, use the PING program installed on your
computer along with the modem IP Address set in section 3.2.3.
Example: ping 192.168.0.35
2. If everything is functioning correctly, replies from the modem will appear on the computer
screen along with the time it took to respond. If unsuccessful, verify the following:
a. The cables are secured.
b. The Link Light is illuminated.
c. The IP Address that is used matches the Modem's IP Address.
d. The Server and Modem are on the same subnet.
4-50
MM200 High-Speed Microwave Modem
TM086 - Rev. 4.1