Radyne MM200 Installation And Operation Manual page 51

MM200 High-Speed Microwave Modem
TRACK FAULT
CHANNEL 2 (menu)
CHANNEL 3 (menu)
CHANNEL 4 (menu)
APC (menu)
RCV OVERRUN
CMD INVALID
MINOR MUX (menu)
MINOR INT1 (menu)
CLK ACTIVITY
DAT ACTIVITY
FIFO FULL
FIFO EMPTY
FRAME VALID
SIGNAL LOSS
MINOR INT2 (menu)
MINOR INT3 (menu)
MINOR INT4 (menu)
MINOR DMX (menu)
DMX SYNCLOCK
MINOR INT1 (menu)
CLK ACTIVITY
DAT ACTIVITY
FIFO FULL
FIFO EMPTY
PLL LOCK
TM086 - Rev. 4.1
Refer to CHANNEL 0 (menu) for
descriptions.
Refer to CHANNEL 0 (menu) for
descriptions.
Refer to CHANNEL 0 (menu) for
descriptions.
APC Receive overrun error
APC Invalid command received
An alarm that will not terminate mux
operations. Red LED will illuminate.
No clock activity on Tx Interface channel.
No data activity on Tx Interface channel.
Tx Interface FIFO overflow.
Tx Interface FIFO underflow.
Tx Interface MPEG framing.
Tx Interface loss of signal.
Refer to MINOR INT0 (menu) for
descriptions.
Refer to MINOR INT0 (menu) for
descriptions.
Refer to MINOR INT0 (menu) for
descriptions.
An alarm that will not terminate demux
operations. Yellow LED will illuminate.
Demux is not receiving valid packets.
No Rx channel packet activity.
No Rx channel data activity.
Rx channel FIFO overflow.
Rx channel FIFO underflow.
User Interfaces
RO RO RO
RO RO RO
RO RO RO
RO RO RO
RO RO RO
RO RO RO
RO RO RO
RO RO RO
RO RO RO
RO RO RO
RO RO RO
RO RO RO
RO RO RO
4-27