Radyne MM200 Installation And Operation Manual page 171

MM200 High-Speed Microwave Modem
DESCRIPTION
"Minor Alarm status:
Bit 0 = QAM lock status
Bit 1 = FEC lock status
Bit 2 = FIFO full status
Bit 3 = FIFO empty status
Bit 4 = Sync lock status
Bit 5 = FIFO reload
Bit 6 = FIFO active
Bit 7 = Track fault
0 = PASS, 1 = FAIL"
::= { radMM200RxChannelStatusEntry 3 }
radMM200RxChannelLatchedMajorAlarmStatus OBJECT-TYPE
SYNTAX AlarmByteType
MAX-ACCESS
STATUS current
DESCRIPTION
"Major Alarm status:
Bit 0 = Mod daughter board FPGA status
Bit 1 = RF PLL lock detect status
Bit 2-7 = Spares
0 = PASS, 1 = FAIL"
::= { radMM200RxChannelStatusEntry 4 }
radMM200RxChannelLatchedMinorAlarmStatus OBJECT-TYPE
SYNTAX AlarmByteType
MAX-ACCESS
STATUS current
DESCRIPTION
"Minor Alarm status:
Bit 0 = QAM lock status
Bit 1 = FEC lock status
Bit 2 = FIFO full status
Bit 3 = FIFO empty status
Bit 4 = Sync lock status
Bit 5 = FIFO reload
Bit 6 = FIFO active
Bit 7 = Spare
0 = PASS, 1 = FAIL"
::= { radMM200RxChannelStatusEntry 5 }
radMM200RxChannelBaudRate OBJECT-TYPE
SYNTAX INTEGER (7000000..200000000)
MAX-ACCESS
STATUS current
DESCRIPTION
"Channel baud rate"
::= { radMM200RxChannelStatusEntry 6 }
radMM200RxChannelOffsetFrequency OBJECT-TYPE
SYNTAX INTEGER (-50000..50000)
MAX-ACCESS
STATUS current
DESCRIPTION
"Channel offset frequency in Hz"
::= { radMM200RxChannelStatusEntry 7 }
radMM200RxChannelAGCIntegrator OBJECT-TYPE
SYNTAX INTEGER (0..10000)
MAX-ACCESS
STATUS current
DESCRIPTION
"Channel AGC integrator"
::= { radMM200RxChannelStatusEntry 8 }
TM086 – Rev 4.1
read-only
read-only
read-only
read-only
read-only
Appendix B
B-23