Radyne MM200 Installation And Operation Manual page 127

MM200 High-Speed Microwave Modem
<1> Interface Volume
<1> Interface Clock
Polarity
<1> Interface Data
Polarity
<1> Interface
Baseband Loopback
<1> Reserved
<1> Interface PRBS
<1> Interface Major
Alarm1 Mask
<1> Interface Minor
Alarm1 Mask
Opcode: <0x2142> Query selected Tx interface configuration and status
<1> Selected interface
number
<1> Selected interface
number
<1> Number of
nonvol bytes*
* M&C developers
MUST use this
number of nonvolatile
TM086 – Rev. 4.1
1 = MPEG 188
2 = MPEG 204
0 = 255
0 = normal
1 = inverted
2 = auto
0 = normal, 1 = inverted
0 = disable, 1 = enable
Spare
0 = normal
1 = prbs_23
2 = prbs_23m
3 = prbs_15
4 = prbs_15m
(Not Yet Implemented)
0 = Mask, 1 = Allow
Bit 0 = Interface Test
Bit 1 - 7 = Spare
0 = Mask, 1 = Allow
Bit 0 = Interface FIFO full
Bit 1 = Interface FIFO empty
Bit 2 = PLL lock
Bit 3 = Interface data activity detect
Bit 4 = Interface clock activity detect
Bit 5 = Interface Tx input framing valid, added for AASI
Bit 6 = Interface signal loss, valid for some interfaces
Bit 7 = Spare
Command Data Field 1 Byte
0 = interface1
1 = interface2
2 = interface3
3 = interface4
Query Response
0 = interface1
1 = interface2
2 = interface3
3 = interface4
Number of nonvol bytes for selected interface
Appendix A
A-27