Table of Contents
Advertisement
User Interfaces
4.15 SNMP Option
1.
From the Main Menu, select '20' for Network Configuration. Verify that Selection 30,
SNMP Option is enabled. The MM200 SNMP Option is enabled at the factory if
purchased by the user. Please contact the Radyne Inc. Customer Service Department if
the SNMP feature is not available.
4.16 Network Configuration
4.17 Terminal Screens
1.
The Network Configuration Screen is accessed from the MM200 Terminal top-level menu,
selection #20. There are two available setup screens: SNMP and Security. Once logged
on, the user can toggle back and forth using Selection Number 12, 'SNMP/Security'.
SNMP Controls Screen:
1.Main Menu
2.Control Mode
3.Term Emulate
4.Term Baud
SETUP
5.TrapType
6.PrimaryTrapHost :
7.SndaryTrapHost :
8.Trace Mode
9.Community
--------------------------------------------- SNMP CONTROLS ----------------------------------------
30.SNMP Option :
31.Boot Mode
32.Modem EthAddr
33.Modem IPAddr :
34.Server EthAddr :
35.Server IPAddr :
37.Router IPAddr :
38.IPAddressMask :
Enter Selection Number:
4-42
:
TERMINAL
:
VT 100 13.Logon
:
9600
14.Logoff
STATUS
:
VERSION2
192.168.0.25
192.168.0.26
:
LEVEL 5
:
public
ENABLE
:
NONVOL
:
0010650D03E8
192.168.0.243
000000000000
192.168.0.50
192.168.0.254
255.255.0.0
MM200 High-Speed Microwave Modem
12.SNMP/Security
Logon User
:
Context Engine ID :
Engine Status
:
Oper-md5
80000A1F01AC1264B0
NORMAL
TM086 - Rev. 4.1
Advertisement
Table of Contents
Troubleshooting
