Console Setup; Ii. Console Setup - NetComm NB702 User Manual

II.

Console Setup

Connect the RS-232 console port to an ASCII data terminal or a PC with Widows
serial Terminal mode of VT-100 (Hyper Terminal). To Start the Hyper-terminal,
follow the steps below.
1. Start "Hyper-terminal" program:
On Windows 98 or Windows NT:
Click on the Start button -> Programs -> Accessories -> Hyper Terminal Group -
> Double Click "Hypertrm.exe" -> Enter Connection Name -> Select Icon -> Click
OK
2. Select a COM port to communicate with the NB704:
Choose direct to COM1 or COM2 and click on OK
3. Set Port Properties:
www.netcomm.com.au
Page 52
Port Setting:
Bit per second: 9600
Data bits: 8
Stop bits: 1
Parity bits: None
Flow Control: None
Settings:
Function, arrow, and ctrl keys act as: Windows keys
Emulation: Auto-detect
Back-scroll buffer lines:
ASCII Setup: Echo typed characters locally
Line delay: 0 milliseconds
Character line feeds incoming line ends: enable
500
Rev. 1 - YML689
NB702/NB704 User Guide