A2. Software Specifications - NetComm NB702 User Manual

A2. Software Specifications

ATM
ATM Cell over SHDSL, AAL5.
Support UBR & CBR, VBR-nrt & VBR-rt.
VPI Range (0-4095) and VCI range (1-65535).
Supports up to 8 PVCs for Bridge mode and 5 PVCs for Router mode.
Supports OAM F4/F5 loopback.
Payload Encapsulation --
RFC2684 (RFC1483), multi-protocol over ATM.
RFC2225 (RFC1577), IPoA.
RFC2364, PPP over ATM (CHAP and PAP supported).
RFC2516, PPPoE (PPP over Ethernet) over ATM.
Bridging
Transparent Bridging (IEEE 802.1D).
RFC2684 (RFC1483) Bridged.
Spanning Tree Protocol (IEEE 802.1D).
Supports IP, IGMP, and PPPoE packets filter function.
Supports port-based VLAN.
Routing
TCP/IP with RIP1, RIP2, or static IP routing.
NAT/PAT – RFC1631 (basic Firewall support).
RFC2684 (RFC1483) Routed.
DNS Relay.
Configuration and Network Management
DHCP server for IP management.
Local console configuration and management through RS-232 port.
Telnet for local or remote management.
TFTP for firmware upgrade.
Web configuration.
Rev. 1 - YML689
NB702/NB704 User Guide
www.netcomm.com.au
Page 91