Manage - NetComm NB702 User Manual

3.1

Manage

Click on the Manage link in the navigation bar.
You will then see three options: IP, Password, and Switch Setup. Each one is described
below.
3.1.1 IP Setup
Click on the IP link on the top of the page. You will then see the Device IP Setup
table. On this page you can change the IP address and subnet mask of the NB702/
NB704.
Ethernet IP Address:
Ethernet Subnet Mask:
Click on the Submit button to complete the configuration. You will then see a
confirmation screen.
Rev. 1 - YML689
NB702/NB704 User Guide
Enter the IP address of this device.
Enter the subnet mask for the IP address.
www.netcomm.com.au
Page 29