Password Setup - NetComm NB702 User Manual

2.1.2

Password Setup

Click on the Password link on the top of the page. You will then see the Change
Password table. On this page you can change the password used to log into the
NB702/NB704.
Old Password:
New Password:
New Password Again:
Click on the Submit button to complete the configuration. You will then see a
confirmation message.
Rev. 1 - YML689
NB702/NB704 User Guide
Enter the old password of the device.
Enter the new password.
Re-type the new password
www.netcomm.com.au
Page 17