605 To Rj-11 Adapter; Usb Cable; Pin (Rs-232 ) Serial Cable - NetComm NB702 User Manual

605 to RJ-11 adapter

The 605 to RJ-11adaptor is provided to comply with the older
610 Telstra wall socket. The 605 to RJ-11 adapter may be used
to convert the supplied RJ-11 cable, if the older connection is
required.

USB cable

A typical USB cord has an "A" connection ("upstream" to plug into the computer)
and a "B" connection ("downstream" to plug into the device).
"A" Connection
By using different connectors on the upstream and downstream ends, cable connection
is simplified. The "B" connection will fit a into the "B" socket of any USB device.
Similarly, any "A" connector can be plugged into any "A" socket, such as on a
computer.
If it is a new device, the operating system auto-detects it and asks for the driver disk.
If the device has already been installed, the computer activates it and starts talking to
it. USB devices can be connected and disconnected at any time.

9 Pin (RS-232 ) Serial Cable

A 9 Pin (RS-232) Serial Cable may be used to connect the NB702/NB704 to a serial
console terminal or a PC running a terminal emulation program, such as Hyper
Terminal. (For further details, See Chapter 3: Command Line Interface.)
Male Connector
www.netcomm.com.au
Page 94
Pin No Name
1 DCD
2 RD
3 TD
4 DTR
5 SGND
6 DSR
7 RTS
8 CTS
9 RI
"B" Connection
Notes/Description No.
Data Carrier Detect
Receive Data (a.k.a RxD, Rx)
Transmit Data (a.k.a TxD, Tx)
Data Terminal Ready
Ground
Data Set Ready
Request To Send
Clear To Send
Ring Indicator
Rev. 1 - YML689
NB702/NB704 User Guide