Login; Bridge Mode Configuration - NetComm NB702 User Manual

1.

Login

The window Enter Network password will pop up while starting the configuration.
With the window active, leave the User Name text box blank, and enter "admin" as the
Password, and then click on the OK button.
2.

Bridge Mode Configuration

By default, the NB702/NB704 is configured in bridge mode. This section describes the
steps involved in setting up the NB702/NB704 as a bridge. The links on the
navigation bar are: Manage, Bridge, xDSL, Status, Save, and Restart. Each one is
described in the next few sections.
Rev. 1 - YML689
NB702/NB704 User Guide
www.netcomm.com.au
Page 15