3.4.3
Routing Table
Click on the Routing Table link on the top of the page. You will then see the Routing
Table Setup page. On this page you can add or remove routing table entries.
Destination IP:
Subnet Mask:
Gateway IP:
Click on the Submit button to complete the configuration. You will then notice that
your configuration has been added to the list.
www.netcomm.com.au
Page 44
Enter the IP address of the destination router.
Enter the subnet mask of that IP address.
Select a gateway IP from the drop down list.
Rev. 1 - YML689
NB702/NB704 User Guide