Bridge - NetComm NB702 User Manual

2.2

Bridge

Click on the Bridge link in the navigation bar.
You will then see the RFC 1483 link, which is described below.
2.2.1 RFC 1483
Click on the RFC 1483 link on the top of the page. You will then see the RFC 1483
Bridge Setup table. On this page you can create up to 8 VPI/VCI channels and
configure its QoS, encapsulation, packet filter, and spanning tree.
Enable:
Rev. 1 - YML689
NB702/NB704 User Guide
Place a check in this box if you would like to enable
the settings in that row.
www.netcomm.com.au
Page 19