NetComm NB702 User Manual page 56

SHOW (Bridge Mode)
Displays the configuration of PVCs, Ethernet IP, Subnet mask, and Full Duplex.
Syntax:
>> show
Ethernet ip: 192.168.0.3
Subnet mask: 255.255.255.0
FUNCTION
Filter
Rfc1483
SHOW (Router Mode)
Displays the configuration of Ethernet IP, Subnet mask, DHCP, and Routing Table.
Syntax:
>> show
Ethernet ip: 192.168.0.3
Subnet mask: 255.255.255.0
DHCP current setting : disable.
DHCP ineffective setting : disable.
effective routing table:
Routing table is empty
www.netcomm.com.au
Page 56
show
The configuration information will then be displayed.
This includes the following: Ethernet IP address,
subnet mask, auto-negotiation of full duplex: (enable,
disable), type of function, VPI/VCI values, Class
(UBR, CBR, VBR) LLC or VCMUX, Spanning tree
(enable, disable), and the type of packet filtering used
(Any, IP, PPPoE).
VPI/VCI CLASS
8/35 ubr
show
The configuration information will then be displayed.
This includes the following: Ethernet IP address,
subnet mask, DHCP current/ineffective setting, and
routing table setting.
LLC/VCMUX Spanning
LLC Disable
NB702/NB704 User Guide
Pkt
ANY
Rev. 1 - YML689