NetComm NB702 User Manual page 35

Click on the Submit button to complete the configuration. You will then see a
confirmation screen.
3.2.3 IPoA (IP over Ethernet)
Click on the IPoA link on the top of the page. You will then see the IPoA Setup table.
On this page you can create your IPoA connection based on your ISPs settings.
Enable:
VPI:
VCI:
QoS:
Rev. 1 - YML689
NB702/NB704 User Guide
Place a check in this box if you would like to enable
the settings in that row.
Enter the VPI value that you received from your ISP.
Enter the VCI value that you received from your ISP.
Select a Quality of Service from the drop down list,
options available are: UBR, CBR, VBR-nrt, VBR –rt.
www.netcomm.com.au
Page 35