NetComm NB702 User Manual page 37

3.2.4 PPPoE (PPP over Ethernet)
Click on the PPPoE link on the top of the page. You will then see the PPPoE Setup
table. On this page you can create your PPPoE connection based on your ISPs
settings.
Enable:
VPI:
VCI:
QoS:
Authentication:
User ID:
Password:
Confirm:
WebEchoInterval:
Click on the Submit button to complete the configuration. You will then see a confirmation
screen.
Rev. 1 - YML689
NB702/NB704 User Guide
Place a check in this box if you would like to enable
the settings in that row.
Enter the VPI value that you received from your ISP.
Enter the VCI value that you received from your ISP.
Select a Quality of Service from the drop down list,
options available are: UBR, CBR, VBR-nrt, VBR –rt.
Select None, PAP, or CHAP from the drop down list.
Enter the username provided by your ISP.
Enter the password provided by your ISP.
Re-type the password provided by your ISP.
Leave this value set to 0, unless your ISP tells you
otherwise.
www.netcomm.com.au
Page 37