III.
Features
■
High-speed symmetrical data transmission on two pairs of twisted copper wire.
■
ITU standard PAM16 Line Code complies with G.991.2 and G.994.1 standards.
■
Supports Annex.A and Annex.B mode operation.
■
Supports Wetting Current range from 0.3mA to 3mA.
■
One Ethernet switch with four 10/100Mbps auto-sensing ports for PC or LAN
connection.
■
Provides a broad range of Symmetrical Multi-rate Data Transmission from 144
Kbps up to 2.3 Mbps.
■
Supports PPPoE (RFC2516), PPP (RFC2364), and IP (RFC 2225/RFC1577)
over ATM over SHDSL.
■
RFC2684 (RFC1483) Bridged/Routed for both LLC/VC MUX.
■
DHCP server supported for easy LAN IP address management.
■
Allows LAN users to access the Internet through Network Address Translation
(NAT, IP sharing) simultaneously.
■
Local OAM&P through command line interface via RS-232 Craft port.
■
Configuration and management by local Telnet, SNMP, and web-browser through
the Ethernet interface, and remotely through SHDSL interface.
■
Firmware upgradeable through TFTP.
■
High performance, simple operation, and low power consumption
www.netcomm.com.au
Page 6
Rev. 1 - YML689
NB702/NB704 User Guide