NetComm NB702 User Manual page 41

Enable:
Range 1 Start IP Address: Enter the IP address from which the NB702/NB704 can
Range 1 End IP Address: Enter the IP address that is the last one that the NB702/
Range 2 Start IP Address: Enter a second range if required.
Range 2 End IP Address: Enter a second range if required.
Primary DNS Address: Enter the IP address of the primary DNS server.
Secondary DNS Address:Enter the IP address of the secondary DNS server (not
Default Lease Time:
Click on the Submit button to complete the configuration. You will then see a
confirmation screen.
Rev. 1 - YML689
NB702/NB704 User Guide
Place a check in this box if you would like to enable the
DHCP Server.
start assigning IP address.
NB704 will assign.
required).
Enter the max number of seconds you would like the IP
addresses assigned.
www.netcomm.com.au
Page 41