NetComm NB702 User Manual page 59

SETSWITCH
Allows you to set the speed of each port on the switch (10 or 100Mpbs) ,(Half(h) or
Full(f)), or auto-negotiation.
Syntax:
Select between
Example:
SHOW
Displays the LAN connection. This includes IP address, Subnet mask, and DHCP
setting.
Syntax:
> lan> show
Ethernet ip: 192.168.0.3
Subnet mask: 255.255.255.0
DHCP current setting : disable.
DHCP ineffective setting : disable.
SWITCHLIST
Displays the speed/duplex setting of each port on the switch.
Syntax:
> lan> switchlist
Rev. 1 - YML689
NB702/NB704 User Guide
SwitchHub configuration
Port 1: Auto
Port 2: 100F
Port 3: Auto
Port 4: Auto
setswitch <1~4> <100F|100H|10F|10H|AUTO>
10fF(10Mbs Full dublex),
10H (10Mbs Half dublex),
100F (100Mbs Full dublex),
100H (10Mbs Half dublex),
AUTO (auto-negotiation)
By default, the speed and duplex of each port is set
to auto.
setswitch 2 100F
show
switchlist
www.netcomm.com.au
Page 59