Bridge Mode Configuration - NetComm NB702 User Manual

2.

Bridge Mode Configuration

This section lists and describes all the commands that are used for configuring the
NB702/NB704 as a bridge. By default, the NB702/NB704 is configured as a bridge.
To switch between Bridge and Router mode, use the "mode" command under the main
menu.
MODE
Switch between bridge and router mode.
Syntax:
>> mode
Please select bridge or router:(b/r,b) b
Current mode is bridge
> >
>> mode
Please select bridge or router:(b/r,b) r
Current mode is router
Rev. 1 - YML689
NB702/NB704 User Guide
mode
You will be prompted to choose between a bridge or router
mode. Type "b" for bridge or "r" for router. The default
mode is: bridge
www.netcomm.com.au
Page 63