NetComm NB702 User Manual page 62

FIX
Activates fixed mode.
Syntax:
Example:
STATUS
Displays the configuration and status of the SHDSL settings.
Syntax:
Last Failed
switchlist
Start Progress: PRE ACTIVATIONon
Attenuation
SNR Margin
Receiver Gain : 0dB
XMIT Power
Framer Status : LOS
Ethernet ip: 19
Current Rate
Line Status
Utopia Address: 0x0000: disable.
Config :
terminal
Rate Mode
Line Rate Range - MAX:2312
4 Wire Mode
TERMINAL
Sets the terminal type as: COE (Central Office Equipment) or CPE (Customer
Premises Equipment).
Syntax:
Example:
www.netcomm.com.au
Page 62
fix <rate>
fix 72 (range must be between 72 and 2320)
status
This includes information such as: terminal type, line
rate range, line code, last failed, attenuation, average
quality, transmit power, current rate, rate mode,
firmware version, SHDSL standard, start progress,
line quality, receiver gain, framer status, and line
status.
: No failure
: 0dBType 'help' or 'hel
: 0dBe details
: 0.0dBm
: 0
: Handshake
- cpe
- adaptive
- byte
terminal <coe>|<cpe>
annex cpe (this will set the terminal to CPE mode, to verify
the terminal setting, use the "status" command)
MIN:72
NB702/NB704 User Guide
Rev. 1 - YML689