Appendix A - Nb704 Specifications; A1. Hardware Specifications - NetComm NB702 User Manual

Appendix A – NB704 Specifications
A1. Hardware Specifications
Local Interface
Four-10/100BaseT Ethernet switch, IEEE 802.3, RJ-45 connectors
10 Half, 10Full, 100Half, 100Full, Auto Negotiation configurable for each port
Supports port-based VLAN
WAN SHDSL Line Interface
Data Rate:
Line Code:
Line Impedance:
Connection Loops:
Connector:
Indicators
PWR – Green LED, indicates power status
ACT – Green LED, indicates data Transmitting / Receiving
LINK – Green LED, indicates local interface link status
WAN – Green LED, indicates SHDSL data link status
ALM – Red LED, indicates data error and operation status
OAM&P
Local:
Remote:
Environment
Operation Temperature: 0?C ~ 45?C
Operation Humidity:
Storage Temperature:
Storage Humidity:
Physical Dimensions
(W x D x H)
Rev. 1 - YML689
NB702/NB704 User Guide
144 Kbps up to 4.6Mbps rate adaptive
PAM16
135 Omhs
Two Pairs (4-wire)
RJ-11
RS-232 Craft Port or Telnet, Web browser via Ethernet
Telnet or web-browser
5% ~ 95%
-20 ~ +85?C
5%~95%
220mm x 169mm x 40mm
www.netcomm.com.au
Page 87