Lan Menu Commands - NetComm NB702 User Manual

1.2

LAN Menu Commands

The following commands are available in both bridge and router mode. To switch
between Bridge and Router mode, use the "mode" command under the main menu.
Type "?" followed by ">>" is used retrieve the list of commands to begin the
configuration. Type "home" to return to the main menu.
Command Syntax
?
Dhcpserver > lan> dhcpserver Set dhcp server configuration
Setdhcp
Setip
Setswitch
Show
Switchlist
DHCPSERVER
Set the IP ranges for the DHCP Server, primary and secondary DNS server IP address.
Syntax:
Syntax:
Example:
SETDHCP
Set an option for DHCP: server or disable.
Syntax:
Example:
SETIP
Set the LAN IP address and subnet mask.
Syntax:
Example:
www.netcomm.com.au
Page 58
Description / Parameters
> dnsrelay> ? Lists the commands available under the current menu
> lan> setdhcp Set dhcp operation
> lan> setip Setup the IP address, and subnet mask for Ethernet
connection
> lan> setswitch Set SwitchHub link speed & duplex
> lan> show Show LAN configuration
> lan> switchlist Show SwitchHub configuration
dhcpserver range1 startIP> <range1 endIP> [<range2
startIP> <range2 endIP> ] [<max-lease-time>]
dhcpserver dns <dns ip1> [<dns ip2>]
dhcpserver dns 192.168.3.2 192.168.3.20
setdhcp <server>|<disable>
setdhcp server
setip <etherip[/<masknum>] [subnet mask]>|<dhcp>
setip 192.168.0.1 255.255.255.0
Rev. 1 - YML689
NB702/NB704 User Guide