NetComm NB702 User Manual page 67

SETPATIP
Set and IP address, subnet mask, and gateway IP for PAT.
Syntax:
Example:
SETPVC
Sets the VPI and VCI values for R1483 bridge mode.
Syntax:
Example:
SETQOS
Sets the Quality of Service (QoS) value for VPI and VCI.
Syntax:
Example:
SETSPAN
Settings for enabling or disabling spanning tree.
Syntax:
Example:
SHOW
Displays the R1483 Bridge configuration. Included is the function name, VPI/VCI
settings, QoS, LLC/VC MUX, Spanning Tree and Packet Filtering.
Syntax:
> r1483> show
FUNCTION VPI/VCI CLASS LLC/VCMUX
Rfc1483
Disable
Rev. 1 - YML689
NB702/NB704 User Guide
setpatip <patip[/<masknum>]> [<gatewayip>]
setpatip 192.168.10.2/24
setpvc [<vpi>/]<vci> [llc/vcmux]
Enter the VPI/VCI value, and choose between LLC or VC
setpvc 8/35 llc
setqos [<vpi>/]<vci> <ubr|cbr|vbr|vbr-rt>
Select between: UBR, CBR, VBR, or VBR-rt
setqos 8/35 ubr
setspan <Enable>|<Disable>
setspan enable
show
8/35 ubr
ANY
192.168.10.5
Spanning Pkt Filter
LLC
www.netcomm.com.au
Page 67