R1483 Menu Commands - NetComm NB702 User Manual

2.3

R1483 Menu Commands

The following commands are available in Bridge Mode only. To switch between Bridge
and Router mode, use the "mode" command under the main menu.
Command Syntax
Delpvc
Pfilter
Setpatip
Setpvc
Setqos
Setspan
Show
DELPVC
Deletes PVC from the table.
Syntax:
Example 1:
Example 2:
PFILTER
Sets the packet filter type.
Syntax:
Select between:
Example:
www.netcomm.com.au
Page 66
Description / Parameters
r1483> delpvc Delete VPI and VCI
r1483> pfilter Set packet filter type
r1483> setpatip Set PAT IP
r1483> setpvc Set VPI and VCI for bridge mode
r1483> setqos Set quality of service (QoS)
r1483> setspan <Enable>|<Disable> spanning tree
r1483> show Show RFC1483 configuration
delpvc <all>|[<vpi>/]<vci>
delpvc all
delpvc 8/35 (delete record of VPI/VCI 8/35)
pfilter [<vpi>/]<vci> <any|ip|pppoe|igmp|none>
Any, IP, PPPoE, IGMP, or None
pfilter 8/35 IP
(deletes all the PVCs)
Rev. 1 - YML689
NB702/NB704 User Guide