Appendix B - Nb702 Specifications; A1. Hardware Specifications - NetComm NB702 User Manual

Appendix B – NB702 Specifications

A1. Hardware Specifications

Local Interface
Four 10/100BaseTX Ethernet switch, IEEE 802.3u, RJ-45 connectors.
10 Half, 10Full, 100Half, 100Full, Auto Negotiation configurable for each port.
Supports port based VLAN.
WAN SHDSL Line Interface
Data Rate:
Line Code:
Line Impedance:
Connection Loops:
Connector:
Indicators
PWR – Green LED, indicates power and operation.
ACT – Green LED, indicates LAN data transmitting / receiving.
LINK – Green LED, indicates LAN data link status.
WAN – Green LED, indicates SHDSL data link status.
ALM – Red LED, indicates data error and operation fault.
OAM&P
Local:
Remote:
Environment
Operation Temperature:
Operation Humidity:
Storage Temperature:
Storage Humidity:
Physical Dimensions
(W x D x H) 224mm x 162mm x 33mm
Power
AC Adapter :
Power Consumption:
Certificates
EMC:
www.netcomm.com.au
Page 90
72 Kbps up to 2.3Mbps rate adaptive
PAM16
135 Omhs
One Pair
RJ-11
RS-232 Craft Port or Telnet, Web browser via
Ethernet.
SNMP, Telnet, or Web-browser.
0?C ~ 45?C
5% ~ 95%
-20 ~ +85?C
5%~95%
Input 110VAC/60Hz or 220VAC/50Hz; Output
12VDC 1A
Less than 10 Watts
CE, FCC Part 15 class B, CB
Rev. 1 - YML689
NB702/NB704 User Guide