Rtable Menu Commands - NetComm NB702 User Manual

3.6

Rtable Menu Commands

The following commands are available in router mode only. To switch between Bridge
and Router mode, use the "mode" command under the main menu.
Type "?" followed by ">>" is used retrieve the list of commands to begin the
configuration. Type "home" to return to the main menu.
Command Syntax
Addiproute
Deliproute
Show
ADDIPROUTE
Add an IP route to the Routing Table.
Syntax:
Example:
DELIPROUTE
Delete an IP route to the Routing Table.
Syntax:
Example:
SHOW
Displays Routing table. Included are the entry number, destination IP address, subnet
mask, and gateway IP address.
Syntax:
> rtable> show
Routing Table:
No. Destination IP
1 0.0.0.0
2 192.168.0.0
effective routing table:
Rev. 1 - YML689
NB702/NB704 User Guide
Description / Parameters
Rtable> addiproute Add routing table
Rtable> deliproute Delete routing table
Rtable> show Show routing table
addiproute <destip[/<masknum>]> [<submask>]
<gatewayip>
addiproute 192.168.2.5 255.255.255.0 192.168.25.5
deliproute <all>|<number>
deliproute 4
The "4" is the fourth entry in the routing table. To
view the routing tables use the "show" command.
show
SubMask
0.0.0.0
255.255.255.0
Gateway IP
192.168.10.3
192.168.0.32
www.netcomm.com.au
Page 85