Main Menu Commands - NetComm NB702 User Manual

1.

Main Menu Commands

Type "?" followed by ">>" is used retrieve the list of commands to begin the
configuration. Type "home" to return to the main menu.
Command Syntax
?
Default
Dnsrelay
Ipoa
Lan
List
Manage
Mode
Pat
Ping
Pppoa
Pppoe
Quick
R1483
Restart
Rtable
Save
Shdsl
Ver
Note: Commands not currently supported in the NB702 are: ipoa, pppoa,
pppoe, rtable
Rev. 1 - YML689
NB702/NB704 User Guide
Description / Parameters
>> ? Lists the commands available under the main menu
>> default Set all configuration to factory setting
>> dnsrelay Entry to DNS Relay menu (See DNS Relay Menu
Commands for more details)
>> ipoa Entry to IPoA menu [Router Mode Only] (See IPoA
Menu Commands for more details)
>> lan Entry to Ethernet Menu (See LAN Menu Commands
for more details)
>> list List status for enabled PVC
>> manage Entry to Management menu (See Manage Menu
Commands for more details)
>> mode Exit this menu and change modem mode
>> pat Entry to PAT menu (See PAT Menu Commands for
more details)
>> ping Ping IP for testing purpose
>> pppoa Entry to PPPoA menu [Router Mode Only] (See PPPoA
Menu Commands for more details)
>> pppoe Entry to PPPoE menu [Router Mode only] (See PPPoE
Menu Commands for more details)
>> quick Quick setup
>> r1483 Training with DSLAM.
Entry to RFC1483 menu (See RFC1483 Menu
Commands for more details)
>> restart Reboot modem
>> rtable Entry to Routing Table Menu [Router Mode Only] (See
Routing Table Menu Commands for more details)
>> save Save and restart modem
>> shdsl Entry to SHDSL menu (See SHDSL Menu Commands
for more details)
>> ver displays software version
www.netcomm.com.au
Page 53