Manage Menu Commands - NetComm NB702 User Manual

1.3

Manage Menu Commands

The following commands are available in both bridge and router mode. To switch
between Bridge and Router mode, use the "mode" command under the main menu.
Type "?" followed by ">>" is used retrieve the list of commands to begin the
configuration. Type "home" to return to the main menu.
Command Syntax
?
Setpass
SETPASS
Allows you to change the password.
Syntax:
New Password:
Confirm password again:
> manage> setpass
Old Password:****
New Password(press ENTER to disable):****
Confirm password again:****
Password has been changed
Saving configuration...
Configuration saved.
www.netcomm.com.au
Page 60
> dnsrelay> ?
> manage> setpass
setpass
type in the new password here, or press Enter to
disable the password.
re-enter the new password.
The password will then be changed and the
configuration will be saved.
Description / Parameters
Lists the commands available under the
current menu
Change/disable password
NB702/NB704 User Guide
Rev. 1 - YML689