NetComm NB702 User Manual page 20

VPI:
VCI:
QoS:
LLC/VCMUX:
Pkt Filter:
Spanning Tree Enable:
Click on the Submit button to complete the configuration. You will then see a
confirmation screen.
www.netcomm.com.au
Page 20
Enter the VPI value that you received from your ISP.
Enter the VCI value that you received from your ISP.
Select a Quality of Service from the drop down list,
options available are: UBR, CBR, VBR-nrt, VBR –rt.
Select an encapsulation method from the drop down
list, options available are: LLC and VCMUX.
Select a packer filter from the drop down list, options
available are: IP, PPPoE, IGMP, or None.
If you would like the connection to use spanning tree,
place a check in this box.
Rev. 1 - YML689
NB702/NB704 User Guide