NetComm NB702 User Manual page 34

3.2.2 PPPoA (PPP over ATM)
Click on the PPPoA link on the top of the page. You will then see the PPPoA Setup
table. On this page you can create your PPPoA connection based on your ISPs
settings.
Enable:
VPI:
VCI:
QoS:
RIP:
Authentication:
User ID:
Password:
Confirm:
WebEchoInterval:
www.netcomm.com.au
Page 34
Place a check in this box if you would like to enable
the settings in that row.
Enter the VPI value that you received from your ISP.
Enter the VCI value that you received from your ISP.
Select a Quality of Service from the drop down list,
options available are: UBR, CBR, VBR-nrt, VBR –rt.
Select an RIP version from the drop down list,
options available are: none, V1, V2, or V1&V2.
Select None, PAP, or CHAP from the drop down list.
Enter the username provided by your ISP.
Enter the password provided by your ISP.
Re-type the password provided by your ISP.
Leave this value set to 0, unless your ISP tells you
otherwise.
Rev. 1 - YML689
NB702/NB704 User Guide