Table of Contents
Advertisement
Section 6 : Basic Operations
Store Mode (continued)
RADF Store Mode
Use this feature to scan more than 100 original into memory from the RADF. Use this
function in conjunction with the Reserve function to increase efficiency of the copying job.
Specifications for RADF Store Mode
❒ Incompatible Basic Copying Conditions: None
❒ Incompatible Special Originals: Resolution (Very high)
❒ Incompatible Applications: Image insert, Dual page, Storing image in Overlay memory
Procedure
1
Set Copying Conditions
1 Make required copying selections.
2 Touch STORE on the Basic Screen to highlight it.
You may find the key already highlighted due to the copying selections made.
Basic Screen
2
Enter Print Quantity
Enter the desired print quantity, using the control panel keypad.
To change the print quantity, press [ C (CLEAR QTY.) ], then enter the correct quantity.
3
Place/Scan Originals ... FACE UP
1 Close the RADF securely.
2 Position originals FACE UP in the RADF.
If the number of originals exceeds 100, divide them into blocks not exceeding 100
sheets and load them from the block with the first page.
HINTS:
• For details on positioning originals, see p. 4-4.
• For original and copy paper information, see Section 4.
6 - 32
Advertisement
Table of Contents
