Table of Contents
Advertisement
Section 7 : Output Modes
Punching Mode
The Punching mode is available only when the PU-108 Punching unit option is installed
on the FS-108/FS-108BM finisher.
When the Punching mode is selected in combination with any of the Primary (Main) tray
output modes, each copied sheet is punched and output to the Primary tray according to
the selected output mode.
NOTE:
Some staple positions previously selected may conflict with this function.
❒ Copy paper size: A3, B4, A4, B5
❒ Paper weight: 60 g/m
Thin paper; 50 g/m
Thick paper; 91 g/m
*: Some 170 g/m
❒ Number of holes: 4 holes
❒ Hole diameter: 6.5 mm ± 0.5 mm
❒ Hole pitch: 80 mm ± 0.5 mm
❒ Incompatible Basic Copying Conditions: Output to Secondary (sub) tray, Rotation Sort,
Rotation Group, Folding/ Stapling & Folding/ Trimming mode
❒ Incompatible Special Originals: Mixed Original (A4R, B5R, A5, A5R mixed), Non STD
Size
❒ Incompatible Applications: Booklet, OHP Interleave
Finisher Mode Selection Screen
Procedure
1 Close the RADF securely, then press [ AUTO RESET ].
2 Touch OUTPUT MENU on the Basic Screen to display the Finisher Mode Selection
Screen.
3 Touch PUNCH to display the Punch Position Selection Screen.
Finisher Mode Selection Screen
7 - 16
2
~ 90 g/m
2
(80 g/m
2
paper recommended)
2
~ 59 g/m
2
~ 170* g/m
2
paper types may not be punched easily.
80mm
2
2
Advertisement
Table of Contents
