Konica Minolta 7075 Instruction Manual page 172

Section 9 : Applications
Sheet/Cover Insertion (continued)
Procedure
1
Load Paper for Copies, Insertions and Covers
Load regular sheets into any tray, and load insert sheets and covers of the same size
as regular sheets into each tray source to be designated on the Sheet/Cover Insertion
Screen.
NOTES:
• When using thick paper or tabbed paper for covers or insertions, load them in the Multi-sheet
bypass tray, unless previously specified and loaded in any other tray.
• Be sure that the trays for copy paper, front/back covers, and insertions should have the same
paper size loaded.
2
Set Copying Conditions
1 Close the RADF securely, then press [AUTO RESET].
2 Touch APPLICATION on the Basic Screen to display the Application Selection Screen.
3 Touch Sheet/Cover Insertion to display the Sheet/Cover Insertion Screen.
4 Select Front Cover Insertion, if desired.
Touch FRONT COPY to insert a copied front cover, or FRONT BLANK to insert a
blank front cover.
Proceed to step 5 to select Back Cover Insertion, if desired.
Proceed to step 6 to select Sheet Insertion, if desired.
Application Selection Screen
Sheet/Cover Insertion Screen
9 - 6