Loading Paper (continued)
Loading Paper in Tray 1, 2, and 3
Be sure to load the paper type specified on the tray key of the Basic Screen; otherwise
mishandled paper may occur.
When lading paper into the tray specified as TAB, see p. 13-5.
Procedure
1 Withdraw tray 1, 2, or 3, and place paper on the tray with the curl side turning up.
Load size A3, B4, F4, A4R, A4, B5R, B5, or A5
Do not stack paper above the tray hook level.
2 Move the green levers (located at the front and the left side) to the edge of the paper.
3 When paper is seated properly, push the tray back fully into the copier.
NOTE:
Do not bump the tray into the main body; otherwise machine trouble may be caused.
Section 13 : Maintenance & Supplies
Loading Paper
13
Maintenance
& Supplies
13 - 3