Table of Contents
Advertisement
Image Store & Output Mode (continued)
4 If the password is correct, touch OK to display the Job Name Entry Screen.
Enter the desired job name in up to 8 characters from the touch screen keypad.
To correct an entry, touch 1-CHARACTER DELETE repeatedly to delete each
character, then enter the correct job name.
5 If the job name is correct, touch OK twice to return to the Basic Screen.
Job Name Entry Screen
6 Select the desired copying conditions, then enter the desired print quantity.
7 Position original(s) FACE UP in the document feeder or FACE DOWN on the platen
glass.
When using Platen store mode, see p. 6-29 to p. 6-31.
When using RADF store mode, see p. 6-32 to p. 6-33.
When using Program job, the scanned and output data can be stored in HDD. See
p. 9-31.
8 Press [ START ] to scan and then print.
When the Store mode is used, touch STORE on the Basic Screen to deselect the
Store mode when the store function is completed, i.e., after all originals are scanned,
then press [ START ] to print.
NOTE:
To suspend the scanning or printing job, press [STOP] on the control panel. The popup menu will
be displayed to ask you how to complete the current job. Touch CONTINUE to continue the job,
EXIT to cancel the job and delete the data, or EXIT after storing data to HDD to store the data
in HDD without printing.
Basic Screen
Section 11 : Server Function
11 - 11
Image
Store&Output
11
S erver
Function
Advertisement
Table of Contents
