Table of Contents
Advertisement
Overlay Memory (continued)
To Overlay Image Stored in HDD (continued)
7 Touch OK to return to the Application Selection Screen.
8 Make additional application selections, or touch OK to return to the Basic Screen.
9 The Store mode is automatically selected, and APS and AMS are released.
Set the desired Copy mode, Copy density, Lens mode, and Copy size on the Basic
Screen.
2
Enter Print Quantity
Enter the desired print quantity, using keypad.
To change the print quantity, press [ C (CLEAR QTY.) ] and enter the correct quantity.
3
Position Originals ... FACE UP in RADF
Position original(s) FACE UP in the document feeder or FACE DOWN on the platen
glass, then press [ START ] to scan.
IMPORTANT: PLACE AND SCAN THE ORIGINALS IN REGULAR ORDER OF PAGINATION.
HINTS:
• For details on positioning originals, see p. 4-2 and p. 4-4.
• For original and copy paper information, see Section 4.
4
Start Copying
Touch STORE to deselect the Store mode, then press
[ START ].
The copier will start printing when ready for output.
To suspend the printing job, press [ STOP ].
After copying is completed, all the scanned data will be
deleted automatically.
Press [ AUTO RESET ] to release the mode and reset the
machine.
CAUTION
When the finisher / trimmer unit / paper exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit; otherwise, mishandled paper will
occur.
FACE DOWN on Platen Glass
Section 9 : Applications
INTERRUPT
PROOF COPY
STOP
CLEAR QTY.
START
9 - 67
Stamp/Overlay
Overlay Memory
9
Applications
TIM
POWER
ON /
Advertisement
Table of Contents
