Table of Contents
Advertisement
Section 12 : Key Operator Mode
Weekly Timer [9] (continued)
Timer Setting [2]
Use this function to set the On/Off times in hours and minutes for each day of the week
or set the collective time for the entire week, i.e., the same On/Off time for each day.
Weekly Timer Setting Menu Screen
Procedure
1 Press [ HELP ] to display the Help Screen, then touch Key Operator Mode .
Enter a 4-digit key operator password, then touch OK to display the Key Operator
Mode Screen. (See note 1.)
2 Touch [9] Weekly timer . Enter your 4-digit Weekly timer master key code, then touch
OK to display the Weekly Timer Setting Menu Screen. (See note 2.)
NOTES:
1 If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 If an invalid Weekly timer master key code is entered, continue by entering the valid 4-digit
code.
3 Touch [2] Timer setting to display the Weekly Timer On/Off Time Setting Screen.
4 When the screen is displayed, the ON-time of Monday is always highlighted.
Enter a 2-digit ON-hour (ex. 8 a.m. is 08) and a 2-digit ON-minute (ex. 7 min. is 07)
using the touch screen keypad, and then touch SET .
Touching SET repeatedly will shift the input section from Monday ON, Monday OFF,
Tuesday ON, Tuesday OFF e.g.
NOTES:
• If ON-time and OFF-time are the same, power will not go on.
• If the setting is 00:00~00:00, you will not be able to set the copiers off/on condition for specific
days.
When setting Sunday OFF-time, Monday ON-time is highlighted again. Proceed to
step 6.
5 To set the ON/OFF time collectively for more than one day of the week, touch Block
timer setting to display the Weekly Timer On/Off Time Block Setting Screen.
12 - 30
Weekly Timer On/Off Time Setting Screen
Weekly Timer On/Off Time Block Setting Screen
Advertisement
Table of Contents
