Table of Contents
Advertisement
Section 12 : Key Operator Mode
Function Menu Map
FUNCTION MENU
[1] System initial
setting
[2] Copier initial
setting
[3] User setting
mode
[4] E.K.C. Function
setting
[5] Lock/delete job memory
[6] Paper type /
Special Size Set
[7] Panel contrast /
Key Sound Adj.
[8] Key operator
data setting
[9] Weekly timer
[10] Control panel adjustment
[11] Tray size setting
12 - 4
SUB FUNCTION MENU AND SETTING OPTIONS
[1] Date&Time setting: [Present time; Setting time; Summer time]
[2] Language select setting: [Japanese; English]
[3] IP address setting: [IP address; Subnetmask; Gateway address;
Line speed]
Copy mode: [RADF; 1-1; 1-2; 2-1; 2-2]
Copy density: [AE; manual]
Lens mode: [AMS; ratio 0.33~4.00]
Paper size: [APS; trays 1, 2, 3, 4, or Multi-sheet bypass tray]
Output: [Output appli.; Staple-sort; Sort]
Function: [Special original; Rotation off]
[1] User density level 1 setting: [darker / lighter 16 levels]
[2] User density level 2 setting: [darker / lighter 16 levels]
[3] User lens mode ratio setting: [Userset 1; Userset 2; Userset 3 (ratio
0.33 ~ 4.00)
[1] E.K.C. data edit: [Change; Add; Delete]
[2] E.K.C. all count reset: [YES; NO]
[3] E.K.C. function setting: [EKC On; EKC Off; Immediately; After job;
Warning]
Paper type: [Blank; Normal; Thick 1; Thick 2; Recycle; Thin; Color;
TAB PAPER; Special; User; Fine; Seal]
Special size: [STD size; STD size (special); Non STD size; Wide size
paper]
[Panel contrast; Backlight contrast; Buzzer volume regulation]
[Name; Key Operator Tel. No.]
[1] Weekly timer ON/OFF setting: [On; Off]
[2] Timer setting: [ON time; OFF time]
[3] Timer action ON/OFF setting: [ON; OFF]
[4] Lunch hour Off setting: [Valid; Invalid]
[5] Timer interrupt password setting: [4-digit password]
ATS/APS switch: [ON; OFF]
Tray priority: [Tray 1, Tray 2, Tray 3, LCT, Bypass]
F u n c t i o n
Advertisement
Table of Contents
