Table of Contents
Advertisement
Section 9 : Applications
Dual Page (continued)
Procedure
1
Set Copying Conditions
1 Close the RADF securely, then press [ AUTO RESET ].
2 Touch APPLICATION on the Basic Screen to display the Application Selection Screen.
3 Touch Dual Page to enter the Dual Page Screen.
Application Selection Screen
Dual Page Screen
4 Touch Facing pages , Front cover + Facing pages , or Front/Back cover + Facing
pages , as required.
5 Touch REVERSE THE SIDE OF OPEN PAGE to change the binding mode according
to the original.
OPTION:
Touch Booklet on the Dual Page Screen to use this function.
6 Touch OK to return to the Application Selection Screen.
7 Make additional application selections, or touch OK to return to the Basic Screen.
APS and AMS are automatically released, and the STORE key appears highlighted
to show that the Store mode is automatically selected.
8 Select the desired copy mode, magnification, and paper size.
NOTE:
When selecting Facing pages and using the platen glass, select 1s1 or 1s2 copy mode.
2
Enter Print Quantity
Enter the desired print quantity, using keypad.
To change the print quantity, press [ C (CLEAR QTY.) ] and enter the correct quantity.
9 - 28
Advertisement
Table of Contents
