Table of Contents
Advertisement
Memory Switch Setting [13] (continued)
The following functions can be provided by the Memory switch settings.
[1] Auto reset timer
Set the reset interval starting from the completion of a copying job until the machine
returns to the initial condition.
[2] AUTO RESET key function
Set the condition of the following modes when AUTO RESET is pressed; Copy mode,
Copy density, Magnification, Tray selection.
[3] RADF-Original effect
Set the machine condition when original is set on RADF in non-RADF mode with RADF
unit closed.
[4] Job memory auto recall (30)
Job memory No. 30 is automatically recalled when power is turned on or when Auto-reset
is restored.
This job recall function works only when Job No. 30 is registered.
[5] Finisher mode by AUTO RESET
Set the Finisher mode to be recalled when AUTO RESET is pressed.
[6] Initial by Key counter insert
Set the machine to return to the initial state when Key counter is inserted.
[7] Erasure outside area of original
Set the machine to delete the outside area of original.
[8] RADF frame erasure selection
Set Frame erasure to function anytime in RADF mode.
[9] Automatic tray switching
When paper is depleted during a copying job, the copier continues copying by switching
to another tray that contains the same size paper.
[10] Platen APS
The copier automatically selects the same size copy paper as the original placed on the
platen glass. (In reduction or enlargement mode, an appropriate paper size is selected
according to the ratio selected.)
[11] RADF APS
The copier automatically selects the same size copy paper as the original placed on the
RADF. (In reduction/enlargement mode, an appropriate paper size is selected according
to the ratio.)
[12] Platen AMS
The copier detects the size of the platen original and selects the appropriate magnification
ratio to correspond to the selected paper size.
[13] RADF AMS
After detecting the original size placed on the RADF the copier automatically selects an
appropriate ratio for the copy when copy size is selected manually.
Section 12 : Key Operator Mode
Memory
Switch Setting
12
Key Operator
Mode
12 - 41
Advertisement
Table of Contents
