Table of Contents
Advertisement
Section 12 : Key Operator Mode
Memory Switch Setting [13] (continued)
[14] Select tray when APS cancel
Select the tray to be automatically selected when APS is released.
[15] Platen original size detect
Select the series of the original paper size detected from the platen glass.
[16] RADF original size detect
Select the series of the original paper size detected from the RADF.
[17] Platen orig. size detect (SMALL)
Select the minimum original paper size detected from the platen glass.
[18] Rotation
Select to activate, activate the Rotation only when the APS/AMS functions, or activate the
Rotation only when the APS/AMS/reduce functions.
[19] Rotation (180 angle)
Set Orientation correction to function anytime or when Rotation is disabled.
[20] B6R size original type
Select the orientation of the B6R size original.
[21] A3, B4, 11x17, 8.5x14, F4 orig. type
Select the orientation of the A3, B4, 11"x17", 8.5"x14", or F4 size original.
[22] Staple mode reset-function
Staple mode is automatically canceled after a job is completed with Staple sort mode ON.
(Sort mode is selected.)
[23] Job offset operating
Set the copier to offset the copies of different jobs when outputting multiple reserve jobs
in succession.
[24] Continuation print
Set the copier to output multiple reserve jobs in succession.
[25] SDF Auto start
Select to feed the SDF original automatically when placed on the RADF, or press [ START ]
to feed the SDF original.
[26] Key click sound
Activate or deactivate the sound each time a key is pressed on the touch panel .
[27] 1 SHOT indication time
Select the SHOT indication time function.
[28] Power save screen
Select the screen to display when pressing the [ POWER SAVER ON/OFF ] key.
[29] START key latch function
Activate or deactivate the latch function.
[30] STOP key function
Select to display or not to display the confirmation message when STOP key is pressed.
12 - 42
Advertisement
Table of Contents
