Table of Contents
Advertisement
Stamp (continued)
When Chapter is already selected, touching STARTING No. on the Set Numbering,
Page Numbering, or Watermark Numbering Type Selection Screen will display the
Starting No. Setting Screen with Chapter starting number setting (see below).
Touch CHAPTER NUMBER or PAGE NUMBER to highlight it, then use the touch
screen keypad or up/down arrow key to enter the desired starting number for each.
Use +/– to enter a minus number to print from halfway through, e.g. –2 to print "1"
from page 4.
Touch OK to return to the previous screen.
Starting No. Setting Screen (with Chapter selected)
9 When selecting WATERMARK or WATERMARK NUMBERING, touch LIGHT ,
NORMAL , DARK , or DARK+ to select the desired density level on each screen.
10 When all the desired selections are made, touch OK to return to the Application
Selection Screen.
11 Make additional application selections, or touch OK to return to the Basic Screen.
2
Enter Print Quantity
Enter Print Quantity, using keypad.
To change the print quantity, press [ C (CLEAR QTY.) ] and enter the correct quantity.
3
Position Original(s) ... FACE UP in RADF
Position original(s) FACE UP in document feeder or FACE DOWN on platen glass.
IMPORTANT: PLACE AND SCAN THE ORIGINALS IN REGULAR ORDER OF PAGINATION.
HINT:
For details on positioning originals, see p. 4-2 and p. 4-4.
FACE DOWN on Platen Glass
Section 9 : Applications
9 - 59
Stamp/Overlay
Overlay Memory
9
Applications
Advertisement
Table of Contents
