Table of Contents
Advertisement
Section 7 : Output Modes
Cover Sheet Feeder (continued)
Cover Sheet Insert Selection Screen
4 Touch FRONT , FRONT+BACK , or BACK to highlight it.
5 Touch OK on the Cover Sheet Insert Selection Screen. The Finisher Mode Selection
Screen will be restored.
6 Touch OK on the Finisher Mode Selection Screen. The Basic Screen will be restored.
7 Select additional copying features, as required.
8 Load the cover sheet paper into the optional cover sheet
feeder of the FS-108BM finisher.
If the paper size loaded in the cover sheet feeder is not
suitable, the following messages will be displayed and
copying will be unavailable.
Please load cover sheet
in cover sheet feeder
Make cover sheet size please coincide
with Paper size
9 Enter the desired print quantity.
10 Position originals in the document feeder or on the platen glass.
When using Store mode, see p. 6-29 to p. 6-33.
11 Press [ START ].
CAUTION:
When the finisher capacity is exceeded due to the print quantity selected, remove the
copied sets as they exit; otherwise, mishandled paper will occur.
7 - 22
Advertisement
Table of Contents
