Table of Contents
Advertisement
Resolution (Image Quality) (continued)
600 Dpi
Select 600 dpi mode to improve the copy image. This mode uses more memory than the
normal default mode or the High mode.
NOTE:
Should memory overflow occur frequently, it is recommended that you contact your Konica service
centre to extend the memory capacity in your machine.
Specifications for 600 Dpi Mode
❒ Incompatible: Storing images in Overlay memory
NOTE:
When using Program Job function, selecting High or Very High mode in one JOB will be
incompatible with 600 dpi in another JOB. See p. 9-31 to p. 9-33.
Procedure
1
Set Copying Conditions
1 Close the RADF securely, then press [ AUTO RESET ].
2 Touch SPECIAL ORIGINAL on the Basic Screen to display the Special Original Screen.
3 Touch 600 dpi to highlight it.
Special Original Screen
4 Select additional copying features, as desired.
5 Touch OK to complete the setting and return to the Basic Screen.
The SPECIAL ORIGINAL key on the Basic Screen appears highlighted, and the 600
dpi icon (
) is displayed in the icon area.
2
Enter Print Quantity
Enter the desired print quantity, using keypad.
To change the print quantity, press [ C (CLEAR QTY.) ] and enter the correct quantity.
Section 8 : Special Original
Resolution
8
Special
Original
8 - 7
Advertisement
Table of Contents
