Table of Contents
Advertisement
Chapter (continued)
7 When all entries are made, touch OK to return to the Application Selection Screen.
8 Make additional Application selections if desired, then touch OK to return to the
Basic Screen.
2
Enter Print Quantity
Enter the desired print quantity, using keypad.
To change the print quantity, press [C (CLEAR QTY.)] and enter the correct quantity.
3
Position Originals ... FACE UP
Position originals FACE UP in the document feeder.
HINTS:
• For details on positioning originals, see p. 4-4.
• For original and copy paper information, see Section 4.
4
Start Copying
Press [START] to scan.
Memory indicator on the upper right of the Basic Screen
allows you to check the remaining memory.
Printing job starts in succession when the machine
becomes ready for output.
To suspend the scanning or printing job, press [STOP].
After copying is completed, all the scanned data will be
deleted automatically.
Press [AUTO RESET] to release the mode and reset the
machine.
CAUTION
When the finisher / trimmer unit / paper exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit; otherwise, mishandled paper will
occur.
Section 9 : Applications
INTERRUPT
PROOF COPY
STOP
CLEAR QTY.
START
9 - 11
Chapter
9
Applications
TIM
POWER
ON /
Advertisement
Table of Contents
