Table of Contents
Advertisement
Section 11 : Server Function
Image Store & Output Mode
Use this function to store the scanned image data in HDD after copying is completed.
This storing function does not conflict with any other copying conditions.
NOTE:
Installation of the optional HDD (HD-102) is required for this function. With the HDD installed, the
HDD STORE key will be displayed on the Finisher Mode Selection Screen (for machine with
Finisher installed) or on the Output Menu Screen (for machine without Finisher).
Procedure
1 Touch OUTPUT MENU on the Basic Screen to display the Finisher Mode Selection
Screen or Output Menu Screen.
Basic Screen
2 Touch HDD STORE . The Image Data Password Entry Screen will be displayed.
Finisher Mode Selection Screen
3 Enter the desired Image data password in up to 8 characters from the touch screen
keypad.
To correct an entry, touch 1-CHARACTER DELETE repeatedly to delete each
character, then enter the correct password.
Image Data Password Entry Screen
11 - 10
Output Menu Screen
Advertisement
Table of Contents
