Table of Contents
Advertisement
Repeat Image (continued)
Procedure
1
Set Copying Conditions
1 Touch APPLICATION on the Basic Screen to display the Application Selection Screen.
2 Touch Repeat to display the Repeat Mode Selection Screen.
Application Selection Screen
Repeat Mode Selection Screen
3 To select the Manual setting mode:
(1) Touch Vertical/Horizontal to highlight it.
(2) Use the upper/lower arrow (▲/▼) key to specify the vertical and horizontal widths
of the repeat image, from 10~150 mm in 1 mm increments. Keep touching the
key to increase/decrease the value continuously.
(3) Or, touch ENTER REPEAT WIDTH BY KEYPAD to display the popup menu to
enter the value from the touch screen keypad. Touch Verti/Horiz. key on the
popup menu each time to shift it from one to another. Touch OK to restore the
Repeat Mode Selection Screen.
Repeat Mode Selection Screen
Section 9 : Applications
9 - 41
Repeat
Image
9
Applications
Advertisement
Table of Contents
